Ⅰ、Product Overview
KSF micro slider displacement sensor (alias: electronic ruler, resistance ruler, potentiometer, displacement sensor) Principle: Potentiometer principle, all sensors are position measurement type, used in the adjustment system (control system) and measurement system, to directly measure the displacement and length, output DC voltage signal, can also be converted into the standard 0-5V, 0-10V or 4-20mA DC signal through the built-in or external V/A converter module. Can also be remote transmission control requirements. KSF micro slider displacement sensor (alias: electronic ruler, resistance ruler, potentiometer, displacement sensor) output displacement variation: 0-100% given input operating voltage (with displacement changes).
Ⅱ、KSF Micro Slider Displacement Sensor Technical Parameters and Inatallation Dimension
KSF minitype | 5mm-15mm | 20mm-30mm | 35mm-50mm | Stroke Length |
Linear Precision (±%FS) | ±0.1% | |||
Resistance (±10%) | 5ΚΩ | |||
Effective Stroke | range+3mm | |||
Resolution | Infinite | |||
Repeatability Precision | 0.01mm | |||
Temperature Coefficient | ≤1.5ppm/℃ | |||
Recommended Current | ≤1mA | |||
Input Voltage | (4ΚΩ~5ΚΩ):≤24VDC | |||
Output | 0~100% × input voltage (change with the movement of therod) | |||
Sensitivity | 1 | |||
Temperature Drift | infinitesimal | |||
Load Characteristic | ≥10mA | |||
Very long life | >100*1000000 cycles,>2*1000000 m | |||
Ingress Protection: IP65; Max Speed: ≤5m/s; Return Speed: ≤1m/s
Applications: KSF Linear Position Sensor equivalent to Novo is a super-minitype of a side slider,
suitable for printing equipment and valve control.
Ⅲ、Output type of KSF micro slider displacement sensor:
Resistance output type (potentiometer) : 5kΩ
Voltage output type (external/built-in module) : 0-5V 0-10V
Current output type (external/built-in module) : 4-20MA (two-wire system, three-wire system)
Digital signal (external/built-in module) : RS485
Ⅳ、KSF micro slider displacement sensor Application range:
Application: KSF is an ultra-small side slider ruler, used for printing equipment, gate control, beauty containers, textile machinery, etc.