KPFZ Frank-mounted self-resetting resistance ruler (alias: resistance ruler, electronic ruler, potentiometer, displacement sensor) principle: Potentiometer principle, all sensors for position measurement type, used to adjust the system (control system) and measurement system, direct measurement of displacement and length, output DC voltage signals, can also be through the built-in or external V/A transmitter module to convert signals into standard 0-5V, 0-10V or 4-20mA DC signals, Control requirements can also be transmitted remotely. KPFZ flange-mounted self-resetting resistance gauge (alias: resistance gauge, electronic ruler, potentiometer, displacement sensor) Output displacement change: 0- Given input operating voltage (changes with displacement).
KPFZ Parameters：
KPF | 10mm | 15mm | 25mm | 50~75mm | 100~300mm | Stroke Length |
Linear Precision (±%FS) | ±1.0% | ±0.05% | ||||
Resistance (±10%) | 2ΚΩ | 5ΚΩ | ||||
Effective Stroke | range+3mm | |||||
Resolution | Infinite | |||||
Repeatability Precision | 0.01mm | |||||
Max Speed | 5m/S | |||||
Recommended Current | ≤1mA | |||||
Temperature Range | -60℃~+150℃ | |||||
Output | 0~ × input voltage (change with the movement of the rod) | |||||
Sensitivity | 1 | |||||
Temperature Drift | infinitesimal | |||||
Very long life | >100*1000000 cycles,>25*1000000 m | |||||
KPFZ Flange-mounted self-resetting resistor ruler output type:
Resistance output type (potentiometer) : 2kΩ, 5kΩ
Voltage output type (built-in/external module) : 0-5V, 0-10V,
Current output type (built-in/external module) : 4-20MA (two-wire system, three-wire system),
Digital signal (built-in/external module) : RS485
KPFZ Install Dimension：
 | | | |