1、 Overview of waterproof and explosion-proof magnetic induction multi coil isolation/counter value angle sensors:
The MFB-MPSFS2 waterproof and explosion-proof series magnetic induction encoder is an internal non-contact absolute/pair/value encoder used to measure the rotation position of the motor. The product is a magnetic induction multi turn sensor independently developed by Miran Technology, and signal conditioning and algorithms are added to calculate the absolute/pair angle. It can work normally underwater for a long
time.
2、 Waterproof and explosion-proof magnetic induction multi coil absolute angle sensor product characteristics:
Signal output: RS485 half duplex communication, 4-20mA, 0-5V, 0-10V
Support (max) speed of 600rpm
Small volume
Strong anti pollution ability
Absolute/pair/value output, data power-off memory
Protection level IP68, capable of long-term normal operation underwater
3、 Application fields of waterproof and explosion-proof magnetic induction multi coil absolute angle sensors:
● Servo control system
● Robot arm
● Position measurement
● Industrial automation control
● DC motor
4、 Electrical specifications for waterproof and explosion-proof magnetic induction multi coil absolute angle sensor:
Technical specifications | Analog Output | Digital Output |
Output Signal | 0～5V/0～10V/4～20mA | RS485 |
Power Supply | +12～24VDC | +12～24VDC |
Resolution | 0.09° | 0.09° |
Calibratable lap range | 1～40 circle | 1～4080 circle |
linear accuracy | ≤0.2%F.S. | ≤0.2%F.S. |
Rotation direction | Clockwise/counterclockwise | |
Allow rotation speed | ≤600rpm | |
Response frequency | 100Hz | |
IP Rate | IP68 | |
Ambient Temperature | -10℃～60℃（At low temperatures, it is necessary to maintain a non crystalline state） | |
Explosion proof sign | Ex db IIC T6 Gb | |
Note: Due to the initialization of the internal circuit after turning on the power, please input the command after powering on for 50ms. The interval between each power outage and power on should be greater than 10 seconds.
防爆证书：
5、 Selection guidance for waterproof and explosion-proof magnetic induction multi coil absolute angle sensors:
6、 Wiring method for waterproof and explosion-proof magnetic induction multi coil absolute angle sensor:
Cable Color | Function | Note |
Red | Supply + VCC | +12V～24VDC |
Black | Supply + GND | 0V |
Green | RS485-A/OUT+ | Output Signal |
White | RS485-B/OUT- | Output Signal |
Shield | Connecting casing |
7、 Installation dimensions of waterproof and explosion-proof magnetic induction multi coil absolute angle sensor:
