Product Introduction
KTF slider type displacement sensor (alias: electronic ruler, resistance ruler, potentiometer, displacement sensor) Principle: Potentiometer principle, all sensors are position measurement type, used in the adjustment system (control system) and measurement system, to directly measure the displacement and length, output DC voltage signal, can also be converted into the standard 0-5V, 0-10V or 4-20mA DC signal through the built-in or external V/A converter module. Can also be remote transmission control requirements. KTF slider displacement sensor (alias: electronic ruler, resistance ruler, potentiometer, displacement sensor) output displacement variation: 0- given input operating voltage (with displacement changes).
Technical Parameters
KTF Linear Transducer | 75~110mm | 125~175mm | 200~550mm | 600~1000mm | 1150~2000mm | 2000mm | Stroke Length |
Linear Precision (±%FS) | ±0.1% | ±0.05% | ±0.04% | ||||
Resistance (±10%) | 5ΚΩ | 10ΚΩ | 20ΚΩ | ||||
Effective Stroke | range+3mm | ||||||
Resolution | Infinite | ||||||
Repeatability Precision | 0.01mm | ||||||
Max Speed | 10m/S | ||||||
Recommended Current | ≤10uA | ||||||
Max Power Supply | 36V | ||||||
Temperature Coefficient | normal 5 ppm/K | ||||||
insulating Strength | ≥10MΩ | ||||||
Insulating Strength | ≤100uA | ||||||
Case Dimension(A) | rang e+56mm | ||||||
Effective Stroke | rang e+8mm | ||||||
Max Bearing Pull | 50KG | ||||||
Working Stress | horizontaldiraction＜10N | ||||||
vertical direction≤10N | |||||||
Vibration Resistance Level | 5...2000HZ, A max=0.8mm, a max=20g | ||||||
Shock Resistance Standard | 50g, 11ms | ||||||
Temperature Range | -60℃~+150℃ | ||||||
Ingress Protection | IP67(DIN40500/IEC529) | ||||||
Sensitivity | 1 | ||||||
Temperature Drift | infinitesimal | ||||||
Very long life | >100*1000000 cycles,>25*1000000 m | ||||||
Install Dimension:
Signl output:
Resistance output type (potentiometer): 5k Ω, 10K Ω, 20K Ω,
Voltage output type (external/internal module): 0-5V, 0-10V,
Current output type (external/internal module): 4-20MA (two wire, three wire),
Digital signal (external/internal module): RS485,
Applications:
The KTF slider displacement sensor is a miniaturized universal installation that is particularly suitable for reducing the installation size in the direction of mechanical length. It is suitable for applications with larger stroke sizes, such as large injection molding machine closing stroke, rubber machine closing stroke, woodworking machinery, and hydraulic machinery