Product

MPS-L magnetic pull-wire displacement sensor is a compact integration of linear displacement sensor in structure. It fully combines the advantages of angle sensor and linear displacement sensor. It has become a compact structure, long measurement stroke, small installation space and high precision. Excellent sensor for measurement. MPS-L magnetic pull wire displacement sensor series products have a large selection space, the stroke ranges from 4500mm to 10000mm, with analog current signal mA: 4-20mA, analog voltage signal V1: 0-5V, V2: 0-10V And pulse signal P: A, B, Z phase digital output, RS485 digital signal output. Meet various signal requirements of large stroke and high precision

Pull wire displacement sensor wiring connection：

wire connector.jpg

Model Selection：

Precautions:

1. The use of the bottom four fixed magnets, according to the site and machine installation space facilities need, directly adsorbed in the installation place or other mechanical use.

2. Stainless steel cable adsorption, pay attention to the horizontal Angle, that is, as far as possible to make the cable from the outlet to the moving part of the mechanism, the horizontal slide during work.

3. Keep a small Angle (allowable deviation +/-3°) to ensure measurement accuracy and cable life.

The steel cable body is stainless steel and coated with fluorine layer, do not let it be hurt by external forces, burn, impact and other improper things: excessive dust, debris accumulation or enough to damage the steel cable stored in the internal pulley or wire outlet will cause damage to the steel cable, resulting in failure of operation.

4. Not installed in the workbench or in front of a fixed seat, do not use your hand or other products to pull out the steel cable and let it bounce back instantly. This will cause the cable to break, damage the body structure and human body safe.

5. The instantaneous acceleration of the reciprocating motion of MPS-S and MPS-M series products shall not exceed 1 m/s; The instantaneous acceleration of the reciprocating motion of MPS-L and MPS-L-P series products shall not exceed 0.5 m/s; This will cause the cable to break, and the company does not assume responsibility beyond this scope.

6. If used in non-linear movement of the mechanism, please install appropriate pulley operation.

7. If used in bad environment or special occasions, please install your own protection mechanism.

Application:

Storage location, reservoir dam protection, gate opening control, pressure machinery, paper making machinery, textile machinery, sheet metal machinery, packaging machinery, printing machinery, level control instrument, construction machinery, industrial robots, injection machines, woodworking machinery, elevators, air compressors/hydraulic presses, height machines, X-Y axis and other length displacement, Liquid level and other related dimensional measurement and position control.

Application

Prev：梅州MPS-XS Magnetic Mounting Rope Displacement Sensor

Next：梅州SM-S Pull Wire Displacement Sensor