KST self resetting displacement sensor (also known as resistance ruler, electronic ruler, potentiometer, displacement sensor) principle: potentiometer principle, all sensors are position measurement type, used to adjust the system (control system) and measurement system, directly measure displacement and length, output DC voltage signal, or convert the signal into standard 0-5V, 0-10V, or 4-20mA DC signal through built-in or external V/A transmission module, It is also possible to transmit control requirements over long distances. KST self resetting displacement sensor (also known as resistance ruler, electronic ruler, potentiometer, displacement sensor) output displacement change: 0- given input working voltage (changes with displacement).
KST Technical Parameters：
KST minitype self-return | 10mm | 15mm | 20mm | 25mm | Stroke Length （mm） 10 15 20 25 | |
Linear Precision (±%FS) | ±0.25% | |||||
Resistance (±10%) | 5ΚΩ | |||||
Effective Stroke | range+3mm | |||||
Resolution | Infinite | |||||
Repeatability Precision | 0.01mm | |||||
Temperature Coefficient | ≤1.5ppm/℃ | |||||
Recommended Current | ≤1mA | |||||
Input Voltage | ≤24VDC | |||||
Output | 0~ × input voltage (change with the movement of the displacement) | |||||
Sensitivity | 1 | |||||
Temperature Drift | infinitesimal | |||||
Load Characteristic | ≥10mA | |||||
Very long life | >100*1000000 cycles,>2*1000000 m | |||||
KST Signal Output：
Resistance output type (potentiometer): 2k Ω
Voltage output type (external module): 0-5V, 0-10V,
Current output type (external module): 4-20MA (two wire, three wire),
Digital signal (external module): RS485
KST Insatall Dimension：
