MR-2232-3 (3L)
Self-control Oil Lubrication Pump
Technical Parameters
Model | Voltage | Rated ritary Speed | Power | Current(A) | Rated pressure kgf/cm² | Max pressure kgf/cm² | Volume | Discharge capacity ml/min | Rated pressure kgf/cm² | Remarks |
MR-2232-300TAB | 220V 50/60HZ | 2400 | 18W | 0.12 | 18 | 35 | 3L | 150-200 CC/min | 30-1000 | MR-2231 refers to voltage 110V MR-2232 refers to voltage 220V |
MR-2232-300XAB | 220V 50/60HZ | |||||||||
MR-2232-310XAB | 220V 50/60HZ |
*Mode name with " T" is resistant, mode name with “X” is volumetric,mode name with “A” is shade-pole motor
The wiring diagram
Performance Characteristics
1.Fuel supply time is set by the UP button(extending the time) and DOWN button(shortening the time) on the right side of the control panel, which can reach up to 200 seconds, with the precision of 1 second. Intermittent time is set by the UP button(extending the time) and DOWN button(shortening the time) on the left side of the control panel, which can
reach up to 999 minutes, with the precision of 0.1 minute. When setting the time, the beat number is 1 if you press the button once. The beat number can be accelerated if you hold down the button. All the settings will take effect immediately after the setting is completed or after the Man button is pressed.
2.When the oil pump shows the EPR alarm, it indicates that the pressure is insufficient. If the the pressure is normal, press the Man button to eliminate the alarm.
3.When the oil pump shows the ERO alarm, the oil quantity is insufficient,and the alarm will be automatically eliminated after refueling .
4.Holding down the Man button is manual test.
(specific lubrication plan can be customized)
