MR-2202-3 (3L)
Oil Lubrication Pump Controlled by PLC Type
Technical Parameters
Model | Voltage | Rated ritary Speed | Power | Current(A) | Rated pressure kgf/cm² | Max pressure kgf/cm² | Volume | Discharge capacity ml/min | Rated pressure kgf/cm² | Remarks |
MR-2202-300TA | 220V 50/60HZ | 2400 | 18W | 0.12 | 18 | 35 | 3L | 150-200 CC/min | 30-1000 | MR-2231 refers to voltage 110V MR-2232 refers to voltage 220V |
MR-2202-300XA | 220V 50/60HZ | |||||||||
MR-2202-310XA | 220V 50/60HZ |
*Mode name with " T" is resistant, mode name with “X” is volumetric,mode name with “A” is s h a d e - p o l e m o t o r
Performance Characteristics
1.Oil supply and intermittent time are adjustable by PC controller.
2.With the out of oil 200~300CC/min, the oil tank capacity has 2, 3 and 4 litre, etc.
There are oil level gauge and automatic oil control device on the oil tank.
The red light is on when the oil quantity is insufficient, which reminds you to fill it up.
3.There are two valves in the oil pump, pressure regulating valve and unloading valve. (refer to figure 1-3)
4.Metal oil tank can be customized.
(specific lubrication plan can be customized)
The control panel
The wiring diagram
