1、 Overview of tension sensors:
Miran Technology tension sensor use strain gauges to form a Wheatstone bridge inside the sensor. When the sensor is subjected to external forces, it will deform, causing a linear increase or decrease in the impedance of the strain gauges tightly attached to the inside of the sensor. Mechanical quantities can be converted into standard analog signals such as 4-20mA, 0-5V, 0-10V, etc. through transmitters, which can be directly connected to automatic control equipment such as PLCs or computers.
Miran Technology tension sensor is made of alloy steel material, which has high stability, easy installation, stable signal and anti-interference ability. It can be installed with pulleys of different specifications.![1705998260759331[1].jpg](/uploads/image/20240221/1708477025460291.jpg "1708477025460291.jpg")
![1705998270322321[1].jpg](/uploads/image/20240221/1708477046218075.jpg "1708477046218075.jpg")
2、 Application range of tension sensor:
Widely used in various types of wire production equipment such as optical fibers, yarns, cables, tapes, etc., for dynamic measurement of tension
3、 Technical parameters of tension sensor:
| Range | 50-300N | ||
| Sensitivity | 2.0±0.1mv/V | Impedance | 350Ω |
| Linearity | ±0.1%FS | Insulation resistance | ≥5000MΩ |
| Nonlinearity | ±0.1%FS | Working Temperature | -20~+80℃ |
| Hysteresis error | ±0.1%FS | Ultimate Overload | 200%R.C |
| Repeatability error | ±0.1%FS | Safety overload | 150%R.C |
| Zero temperature | ±0.05%FS/10℃ | Material | Alloy steel |
| Creep | ±0.1%FS/30min | Power Supply | +12-24VDC |
4、 Wiring method of tension sensor:
Red wire: Power supply positive +12-24VDC
Black wire: Power supply negative 0V
Green line: Signal output
Shielded wire: Ground GND
5、 Selection of tension sensor wiring:![1700034842959865[1].jpg](/uploads/image/20240221/1708477078573998.jpg "1708477078573998.jpg")
6、 Installation dimensions of tension sensor:
![1700034842684259[1].jpg](/uploads/image/20240221/1708477090964345.jpg "1708477090964345.jpg")