Product Introduction
KPF flange type displacement sensor (alias: electronic ruler, resistance ruler, potentiometer, displacement sensor) principle: Potentiometer principle, all sensors for position measurement type, used to adjust the system (control system) and measurement system, direct measurement of displacement and length, output DC voltage signals, can also be through the built-in or external V/A transmitter module to convert signals into standard 0-5V, 0-10V or 4-20mA DC signals, Control requirements can also be transmitted remotely. KPF flange type displacement sensor (alias: electronic ruler, resistance ruler, potentiometer, displacement sensor) Output displacement change: 0- given input operating voltage (changes with displacement).
Parameters and installation dimensions of KPF flange displacement sensor:
KPF | 10mm | 15mm | 25mm | 50~75mm | 100~300mm | Stroke Length |
Linear Precision (±%FS) | ±1.0% | ±0.05% | ||||
Resistance (±10%) | 2ΚΩ | 5ΚΩ | ||||
Effective Stroke | range+3mm | |||||
Resolution | Infinite | |||||
Repeatability Precision | 0.01mm | |||||
Max Speed | 5m/S | |||||
Recommended Current | ≤1mA | |||||
Temperature Range | -60℃~+150℃ | |||||
Output | 0~ × input voltage (change with the movement of the rod) | |||||
Sensitivity | 1 | |||||
Temperature Drift | infinitesimal | |||||
Very long life | >100*1000000 cycles,>25*1000000 m | |||||
Output type of KPF flanged displacement sensor:
Resistance output type (potentiometer) : 5kΩ 10KΩ
Voltage output type (external/built-in module) : 0-5V 0-10V
Current output type (external/built-in module) : 4-20MA (two-wire system, three-wire system)
Digital signal (external/built-in module) : RS485
KPF flange displacement sensor application range:
Application: KPF is a miniature tie rod type flange surface mounting structure. Suitable for equipment cavity internal detection, such as: coal machinery, hydraulic machinery, cavity internal position detection.