KPC1H Hesmann plug outlet pull rod resistance gauge (also known as crack gauge, crack displacement sensor, resistance gauge, potentiometer, displacement sensor) Principle: The principle of potentiometer, all sensors are position measurement type, used to adjust the system (control system) and measurement system, directly measure displacement and length, output DC voltage signal, The signal can also be converted into standard 0-5V, 0-10V, or 4-20mA DC signals through built-in or external V/A transmission modules, and control requirements can also be transmitted over long distances. KPC1H Hesmann plug outlet pull rod resistance ruler (also known as crack gauge, crack displacement sensor, resistance ruler, potentiometer, displacement sensor) output displacement change: 0- given input working voltage (changes with displacement).
Selection of KPC1H Hesmann plug outlet pull rod resistance ruler：
Technical Parameters and Install Dimension
| Standard Specifications: | brand:Miran | ||||
| KPC1H | 50~110mm | 125~175mm | 200~550mm | 600~1250mm | Stroke Length 850 900 950 1000 1150 1250
|
| Linear Precision (±%FS) | ±0.1% | ±0.05% | |||
| Resistance (±10%) | 5ΚΩ | 10ΚΩ | |||
| Effective Stroke | range+7mm | ||||
| Resolution | Infinite | ||||
| Repeatability Precision | 0.01mm | ||||
| Max Speed | 10m/S | ||||
| Recommended Current | ≤1mA | ||||
| Temperature Range | -60℃~+150℃ | ||||
| Sensitivity | 1 | ||||
| Temperature Drift | infinitesimal | ||||
| Very long life | >100*1000000 cycles,>25*1000000 m | ||||
KPC1H Signal Output：
Resistance output type (potentiometer): 5k Ω, 10K Ω,
Voltage output type (external/internal module): 0-5V, 0-10V,
Current output type (external/internal module): 4-20MA (two wire, three wire),
Digital signal (external/internal module): RS485.
KPC1H Application Field：
Application scope: KPC1 is a hinged operation mode with fixed installation at both ends, suitable for detecting positions with large mechanical travel and swinging. It has no requirements for installation centering, such as crack measurement and monitoring, bridge measurement and monitoring, robots, extractors, brick machines, ceramic machinery, water gate control, woodworking machinery, hydraulic machinery, etc.