MFTS1 Split-type Magnetostrictive Displacement Sensor Standard Parameters:
1. Range:50～3000mm
2. Supply voltage: +24VDC
3. Output form/analogue signal: current 4-20mA and 0-20mA, voltage 0-5V and 0-10V.
Digital signal: RS485, MODBUS-RTU, CANopen, SSI, Start-stop
4. Load capacity: voltage signal output load ≥ 4KΩ current signal output load ≤ 500Ω
5. Non-linear error: ≤0.05%FS
6. Repeatability error:≤0.005%FS
7. Resolution:≤0.01mm
8. Hysteresis:≤0.001%FS
9. Temperature stability:≤0.002%/°C
10. Working current:≤16mA
11. Operating temperature:T1:-20～+55℃,T2:-40～+80℃.
12. Stem material: 0Cr18Ni9 (304) 316 stainless steel (special order)
13. Electronic warehouse shell material: 0Cr18Ni9 (304) 316 stainless steel (special order)
14. Leads: high-temperature twisted shielded cable (default length: 1m, also available upon request)
15. Shell protection grade: IP65
MFTS1 Split-type Magnetostrictive Displacement Sensor Wiring Mode:
Before wiring, please check whether the power supply meets the requirements of +24VDC, and the power output must be greater than the total power
consumption of the product,calculated according to the different ranges of each sensor ≤ 95mA. If the power supply does not meet the requirements,
please replace the power supply to ensure that the sensor can work properly.
MFTS1 Split-type Magnetostrictive Displacement Sensor are wired for analogue signal output:
1. Waterproof connector straight out of the line wiring:
Sensor has a total of five contacts: power positive (brown), power negative (black), signal output positive (blue),
signal output negative (white), shell ground (shielded wire)
2. Aviation plug wiring:
Sensor has five contacts: ① power supply positive (brown), ② power supply negative (black), ③ signal output positive (blue),
④ signal output negative (white), ⑤ shell ground (shielded wire)
MFTS1 Split-type Magnetostrictive Displacement Sensor digital signal output wiring:
1. Waterproof connector wiring (RS485 (MODBUS-RTU) signal output):
The sensor has a total of five contacts: positive power (brown), power ground (black), RS485A (blue), RS485B (white), shell ground (shielded wire)
2. Aviation plug wiring method (RS485 (MODBUS-RTU) signal output):
The sensor has five contacts: ① positive power (brown), ② power ground (black), ③ RS485A (blue), ④ RS485B (white), ⑤ shell ground (shielded wire).
3. Waterproof connector wiring method (SSI signal output):
Sensor has five contacts: positive power (brown), power ground (black), clock positive (green), clock negative (white), data positive (red),
data negative (yellow), shell ground (shielded wire)
4. Aviation plug wiring mode (SSI signal output):
The sensor has five contacts: ① positive power (brown), ② power ground (black), ③ clock positive (green),
④ clock negative (white), ⑤ data positive (red), ⑥ data negative (yellow), ⑦ shell ground (shielded wire).
5. Waterproof connector wiring (CAN open signal output):
The sensor has five contacts: power positive (brown), power negative (black), CAN-H (blue), CAN-L (white), ground (shielded wire).
6. Aviation connector wiring (CAN open signal output):
The sensor has five contacts: ① power positive (brown), ② power negative (black), ③ CAN-H (blue), ④ CAN-L (white), ⑤ grounding (shielded wire).
MFTS1 Split Magnetostrictive Displacement Sensor Application Areas:
Servo hydraulic cylinder piston position preset and feedback, servo cylinder piston position preset and feedback, grinding machinery position preset and feedback, casting and forging machine tool position preset and feedback, other machinery such as gantry machine tool position preset and feedback, roadheader, shield machine, coal mining machinery cylinder position preset and feedback, engineering lifting machinery cylinder position preset and feedback, rolling mill and other steel mill machinery cylinder position preset and feedback, the Blowing machine cylinder position preset and feedback, injection moulding machinery cylinder position preset and feedback, railway, bridge regulation, water level detection, sluice gate control, timber machinery position preset and feedback, cylinder level position preset and feedback, chemical container level position preset and feedback, drinking water and sewage treatment system, geodesy system, gate opening position preset and feedback, cylinder level measurement.
MFTS1 Split-type Magnetostrictive Displacement Sensor Installation Dimension Drawing:
MFTS1 Split-type Magtostrictive Displacement sensor Selection Guide: