MTF1/MTF2 slider type Magnetostrictive displacement sensor Technical parameters:
1.Measuring range :50 ~ 5000mm
2. Power supply voltage: +12VDC to +24VDC
3. Output form/analog signal: current 4-20mA and 0-20mA, voltage 0-5V and 0-10V,
Digital signal: RS485, MODBUS-RTU, CANopen, Start-stop
4. Load capacity: voltage signal output load ≥4KΩ Current signal output load ≤500Ω
5. Nonlinear error :≤0.05%FS
6. Repeatability error :≤0.005%FS
7. Resolution :≤0.038mm
8. Hysteresis :≤0.001%FS
9. Temperature stability: ≤0.002%/℃
10. Working current: ≤16mA
11. Working pressure: continuous working pressure ≤35MPa (MTL built-in high pressure series)
12. Working temperature :T1: -20 ~ +55℃, T2: -40 ~ +80℃,
13. Electronic warehouse shell material :0Cr18Ni9 (304) 316 stainless steel (special custom)
14. Lead mode: high temperature resistant twisted pair shielded cable (default length: 1m, can also be provided according to user requirements)
15. Shell protection grade: IP65, IP67
MTF1/MTF2 slider type magnetostrictive displacement sensor wiring mode:
Before connecting cables, check whether the power supply meets the following requirements: +24VDC and the output power of the power supply must be greater than the total power consumption. The output power of each sensor must be less than or equal to 95mA in different ranges. If electricity
Analog signal output wiring mode:
1. Direct connection of waterproof connector:
The sensor has five contacts: power supply positive (brown), power supply negative (black), signal output positive (blue), signal output negative (white), housing ground (shielded wire)
2. Aviation plug wiring:
The sensor has five contacts: (1) power supply positive (brown), (2) power supply negative (black), (3) signal output positive (blue), (4) signal output negative (white), (5) housing ground (shielded wire)
Digital signal output wiring mode:
1. Direct connection of waterproof connector:
The sensor has five contacts: positive power supply (brown), power supply ground (black), RS485A(blue), RS485B (white), housing ground (shielded wire)
2. Aviation plug wiring:
The sensor has five contacts: ① positive power supply (brown), ② power supply ground (black), ③RS485A(blue), ④RS485B (white), ⑤ housing ground (shielded wire)
MTF1/MTF2 Slider Magnetostrictive displacement sensor Applications:
Servo hydraulic cylinder piston position preset and feedback, servo cylinder piston position preset and feedback, grinding machinery position preset and feedback, casting and forging machine position preset and feedback, other machinery such as gantry machine position preset and feedback, boring machine, shield machine, coal mine mechanical cylinder position preset and feedback, engineering lifting mechanical cylinder position preset and feedback, Position presetting and feedback of mechanical cylinder in steel mills such as rolling mills, position presetting and feedback of oil cylinder in blow molding, position presetting and feedback of injection molding machinery, adjustment of railway and bridge, detection of water level, control of sluice gates, position presetting and feedback of wood machinery, position presetting and feedback of cylinder level, position presetting and feedback of chemical container level, drinking water and sewage treatment system, Geodetic system, gate opening position preset and feedback, cylinder level measurement.
MTF1/MTF2 Slider type Magnetostrictive displacement sensor Mounting size:
