Product introduction:
The six axis (attitude) inclination (dynamic) sensor uses a digital MEMS dynamic chip internally, which can measure the attitude parameters (roll, pitch, and azimuth) of the moving carrier, suitable for inclination measurement in motion or vibration states. The product is equipped with built-in acceleration and gyroscopic sensors, integrated with Kalman filtering algorithm, allowing for real-time measurement of carrier motion data in motion or vibration states. The RS485/232/TTL signal output modes of the product are optional and have strong scalability.
The six axis dynamic tilt sensor adopts a non-contact measurement method, which can output the current attitude tilt angle in real time. It is simple to use and does not require the installation of two surfaces with relative changes. Internally integrated with high-precision AD and gyroscope units, it can compensate for nonlinearity, orthogonal coupling, temperature drift, and centrifugal acceleration in real time, greatly eliminating centrifugal errors caused by motion acceleration interference, improving the dynamic measurement accuracy of the product, and can adapt to work in complex motion scenes and harsh environments for a long time. This product belongs to the dynamic and static dual-mode measurement sensor, with strong resistance to external electromagnetic interference, suitable for various large high-intensity impact vibration industrial environments, and is an ideal choice for industrial automation control measurement posture.
Application:
● Surveying and mapping instruments ● Monitoring of high-rise buildings
● Railway locomotive monitoring ● Bridge and dam monitoring
● Tower inclination monitoring ● Geological equipment inclination monitoring
● Measurement of inclination angle of construction machinery ● Petroleum drilling equipment
● Industrial automation posture control ● Precision platform automatic leveling
Product parameters:
Measurement axis | X/Y/Z | ||
measuring range | Roll±180°，Pitch±90°,Position±180°（The initial value for power failure is0°） | ||
output signal | RS485、RS232、TTL | ||
resolving power | 0.01° | ||
Linear accuracy | static state/@25°C | ±0.05° | |
dynamic/@25°C | ±0.1° | ||
gyroscope | Stroke | ±250°/s | |
Zero bias stability(10s mean value) | 8.5°/h | ||
Zero bias instability(allan) | 4.5°/h | ||
Angle random walk coefficient(allan) | 0.25°/sqrt(h) | ||
acceleration | Stroke | ±8g | |
Zero bias stability(10s mean value) | 0.02mg | ||
Zero bias instability(allan) | 0.005mg | ||
Speed random walk coefficient(allan) | 0.005m/s/sqrt(h) | ||
zero temperature | -40～85°C | ±0.01°/°C | |
Sensitivity temperature coefficient | -40～85°C | ≤100ppm/°C | |
Power on start time | 1S | response time | 0.01S |
Mean time between failures MTBF | ≥98000H/times | insulation resistance | ≥100Mohm |
material | kirsite | install | M4 Screw |
electromagnetic compatibility | reference EN61000和GBT17626 | ||
Impact resistance | 100g@11ms、Triaxial（Half sine wave） | ||
Anti vibration | 10grms、10～1000Hz | ||
Protection level | IP68 | ||
Product Dimension:
